AQUA SOLUTIONS' Compact RO+DI Systems
should be considered whenever:
Incoming tap water contains more than 170 ppm of total dissolved
solids, and/or
Type I purified water usage exceeds 20 liters/day or 100 liters/week.
Under these conditions, compact RO+DI systems can produce better
quality water, at lower cost, than systems that don't have built-in
RO pretreatment. They are ideally suited for those applications
where the existing pretreatment system is either unreliable, overloaded,
or non-existent. in addition, they are also suitable for installations
where either space or funding limitations preclude purchasing a
separate RO pretreatment system, since they are very competitively
priced!
--------------------------------------------------------------------------------
Features and Benefits:
Built-in, 8 liter/hour RO pretreatment system
Fully automatic operation and complete instrumentation
18 megohm-cm Type I Reagent Grade Water at 50-100 ppb TOC
Continuous recirculation ensures superior water quality at all
times
Highest flow rate (3 liters per minute) of any comparably sized
system
Highest ion exchange capacity (2,000 grains) of any comparable
system
Built-in activated carbon prefilter reduces particulates & organics
for longer DI module life
Digital, temperature-compensated resistivity monitor with red/green
LED alarms
Teflon recirculating remote dispenser with 0.10 µm final
filter capsule
System can be bench, shelf or wall-mounted at no extra charge
Two (2) year system warranty (US & Canada only)
--------------------------------------------------------------------------------
AQUA SOLUTIONS' RO+DI Systems - Available Models
Model RODI-C-1A Combination RO + Analytical Grade Type I DI System
is designed for operation on tap water containing up to 1,000+
ppm of total dissolved solids. It requires purification kit number
2613M1T-A.
Model RODI-C-1AU Combination RO + Analytical Grade Type I DI System
is designed for operation on tap water containing up to 1,000+
ppm of total dissolved solids. It includes a built-in ultraviolet
(UV) sterilizer to control the growth of microorganisms within
the system. It requires purification kit number 2613M1T-A.
Note: Models RODI-C-1B and RODI-C-1BU (listed below) include a
built-in 5,000 MWCO ultrafilter to provide a 4-6 log reduction
pyrogen/endotoxin, resulting in Type I water that is pyrogen and
endotoxin free.
Model RODI-C-1B Combination RO + Biological Grade Type I DI System
is designed for operation on tap water containing up to 1,000+
ppm of total dissolved solids. It requires purification kit number
2613M1T-A.
Model RODI-C-1BU Combination RO + Biological Grade Type I DI System
is designed for operation on tap water containing up to 1,000+
ppm of total dissolved solids. It includes a built-in ultraviolet
(UV) sterilizer to control the growth of microorganisms within
the system. It requires purification kit number 2613M1T-A.
Note: Models RODI-C-1AL and RODI-C-1BL (listed below) include
a built-in ultraviolet (UV) oxidizer/sterilizer to reduce TOC to
the lowest possible levels.
Model RODI-C-1BL also includes a 5,000 MWCO ultrafilter to provide
a 4-6 log reduction pyrogen/endotoxin, resulting in Type I water
that is pyrogen and endotoxin free, and has no RNase or DNase activity.
Model RODI-C-1AL Combination RO + Ultra-Low TOC Analytical Grade
Type I DI System is designed for operation on tap water containing
up to 1,000+ ppm of total dissolved solids. It requires purification
kit number 2613M1T-A.
Model RODI-C-1BL Combination RO + Ultra-Low TOC Biological Grade
Type I DI System is designed for operation on tap water containing
up to 1,000+ ppm of total dissolved solids. It requires purification
kit number 2613M1T-A.
|
