AQUA SOLUTIONS' Reverse Osmosis (RO) Pretreatment Systems

AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems are designed for fully-automatic operation, and are compatible with most Type I and Type II Reagent Grade DI Systems.

Reverse Osmosis is a cost-effective technology for pretreating tap water prior to final purification by a DI system.

An RO system can effectively remove up to 99% of the contaminants in tap water, thereby reducing the operating cost of a DI system by more than 90-95%.

A single RO system can be used to pretreat the tap water feed for several Type I or Type II DI systems, and/or point-of-use locations.

AQUA SOLUTIONS' Reverse Osmosis Pretreatment Systems include a pressurized RO storage tank, which eliminates the need for level controls, overflow piping, and transfer pumps.

A Reverse Osmosis System should be considered under the following circumstances:

Incoming tap water contains more than 170 parts per million (ppm) of total dissolved solids, or

DI water usage exceeds 40 liters per day on a Type II DI System, or

DI water usage exceeds 20 liters per day on a Type I DI System.

-------------------------------------------------------------------------------

There are two criteria to consider when determining if a reverse osmosis pretreatment system is either required, or can be justified, based on cost savings:

Can the DI system alone produce the desired quality and quantity of purified water that is needed for the applications at hand?

IF NOT, AN RO PRETREATMENT SYSTEM IS REQUIRED.

Would it cost more overall (including capital and operating costs over 1-3 years), to process the tap water via DI alone, or with a combination of RO plus DI?

IF DI ALONE COSTS MORE, AN RO SYSTEM IS JUSTIFIED.

--------------------------------------------------------------------------------

Features and Benefits:

-Fully automatic operation

-Built-in activated carbon prefilter extends membrane life

-Product and reject flow meters monitor & control flow rates

-Low pressure switch shuts system down if line pressure is lost

-Pressurized storage tank eliminates level controls and transfer pump

-Built-in flow totalizer monitors water usage for prefilter cartridge replacement

-TFC (thin film composite) RO membranes offer high performance and long life

-Storage tank pressure switch automatically shuts system down when tank is full

-Temperature-compensated conductivity monitor with digital display

-System can be bench, shelf or wall-mount at no extra charge

-Two (2) year system warranty (US & Canada only)

--------------------------------------------------------------------------------

Solution 2000 Standard Reverse Osmosis Systems:

Model RO2001 has a rated capacity of 10 liters/hour & includes a 42 liter pressurized storage tank.

Model RO2002 has a rated capacity of 20 liters/hour & includes a 130 liter pressurized storage tank.

Model RO2003 has a rated capacity of 30 liters/hour & includes a 130 liter pressurized storage tank.

--------------------------------------------------------------------------------

High Flow, High Capacity Reverse Osmosis Systems (not available for export):

High flow/capacity RO systems are similar to standard systems, except that they have significantly higher flow rates (100-150 liters per hour).

Model RO2100 has a rated capacity of 100 liters/hour & includes a 130 liter pressurized storage tank.

Model RO2150 has a rated capacity of 150 liters/hour & includes a 130 liter pressurized storage tank.