AQUA SOLUTIONS' Type II Reagent Grade Water Purification Systems

Type II reagent grade water is defined by ASTM as water that has greater than 1 megohm-cm resistivity. CAP and NCCLS define Type II water as having greater than 2 megohm-cm resistivity. Type II water is routinely used to wash and rinse glassware, either manually or in the final rinse cycle of an automatic glassware washer.

AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. Ultimately, dual-module systems cost less to operate.

They are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications.

AQUA SOLUTIONS' Type II DI systems are designed from the ground up to be user-installable and user-serviceable!

All AQUA SOLUTIONS' Type II Systems produce purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.

--------------------------------------------------------------------------------

Features and Benefits of an AQUA SOLUTIONS' Type II Systems

Better quality water - we use virgin (i.e., brand new) ion exchange resin and better quality tanks and fittings. Most other companies collect up used ion exchange resin and regenerate it in large batches. In some cases, there is no telling exactly where and how this resin was previously used. Regenerated resin can contain impurities from other locations and applications.

Higher capacity - virgin ion exchange resin has up to 40% more ion exchange capacity than regenerated DI resin.

No monthly rental charges - you purchase and own (not lease) the hardware from us at a reasonable cost.

No installation charges - the system is so easy to install, you can do it yourself.

No service charges - thanks to our snap-in, quick-disconnect fittings, you replace the DI tanks yourself in just minutes.

It puts you in control - if a DI tank becomes exhausted right in the middle of an experiment, or on a weekend, you can install the spare tank yourself, in just minutes.

It can actually cost less than a service DI system - since, with our system, you only pay for refilling the DI tanks when they are completely exhausted (not every few months), you are not paying for products or services you don't use or need.

--------------------------------------------------------------------------------

The AQUA SOLUTIONS' Type II DI Product Line Includes:

For point-of-use applications and low flow (3-6 liters/min) glassware washers:

Model 2618S1 has a flow rate of 3 liters/minute, and includes one installed DI tank plus one spare DI tank. Each DI tank contains 1/4 cu ft of virgin ion exchange resin, with a capacity of ~3,000 grains.
Model 2618S2 has a flow rate of 3 liters/minute, and includes two installed DI tanks plus one spare DI tank. Each DI tank contains 1/4 cu ft of virgin ion exchange resin, with a capacity of ~3,000 grains.
Model 2635S1 has a flow rate of 6 liters/minute, and includes one installed DI tank plus one spare DI tank. Each DI tank contains 1/2 cu ft of virgin ion exchange resin, with a capacity of ~6,000 grains.
Model 2635S2 has a flow rate of 6 liters/minute, and includes two installed DI tanks plus one spare DI tank. Each DI tank contains 1/2 cu ft of virgin ion exchange resin, with a capacity of ~6,000 grains.
High Flow Systems for Glassware Washers, and other high flow (7-40 liters/min) applications:

Model 2635S2-DW11 includes a 42 liter pressurized storage tank and has a flow rate of up to 15 liters/minute. The system includes two installed DI tanks plus one spare DI tank. Each DI tank contains 1/2 cu ft of virgin ion exchange resin, with a capacity of ~6,000 grains.

Model 2635S2-DW includes a 130 liter pressurized storage tank and has a flow rate of up to 40 liters/minute. The system includes two installed DI tanks plus one spare DI tank. Each DI tank contains 1/2 cu ft of virgin ion exchange resin, with a capacity of ~6,000 grains.