| Rotanta 46
Benchtop Centrifuge
Non-Refrigerated/Refrigerated
OPERATING AND FEATURES
Accommodates various tube systems from 1.1ml to 750ml as well as racks,
microtitre plates, micronic systems, culture plates and deep well plates
Microprocessor-controlled
STANDARD CONTROL PANEL
Clearly arranged, water-protected foil keypad for entering the parameters
Speed RPM: Input in increments of 10
Running Time: Input in minutes
Impulse key
Change-over RPM/RCF: By entering the rotor radius r/mm the centrifuge will
calculate/indicate speed or RCF
Relative centrifugal force (RCF): Input in increments of 10
Run up/run down time: Input of acceleration and braking ramps in levels of
1-9
Display of actual values of the parameters during centrifugation
Pre-cooling program is standard (CFC-free cooling) with Rotanta 46R model
Temperature, T/C°: With Rotanta 46R model, Controllable within a range
of
-20°C to +40°C.
Input in increments of 1
“S” CONTROL PANEL
Clearly arrange, water protected foil keypad for entering the parameters
Ability to store 89 complete running programs
Speed RPM: Input in increments of 10
Radius (r/mm): Needs to be entered when speed or RCF have to be determined
Running time (t): Input in minutes and seconds
Relative centrifugal force (RCF): Input in increments of 1
Run up/Run down time: Input of acceleration and braking ramps in levels of
1-9
Pre-cooling program is standard (CFC-free cooling) with Rotanta 46RS model
Temperature, T/C°: With Rotanta 46RS model, Controllable within a range
of
-20°C to +40°C.
Input in increments of 1°C
SAFETY
Metal housing and metal lid, paneling finished in scratch and impact resistant
coating
Stainless steel centrifuging chamber of stainless steel, easy to clean while
providing additional safety
Convenient twist lock enables effortless opening and closing of the lid
Lid locking
Lid holding
Lid dropping protection
Imbalance switch-off
Emergency lid lock release
Viewing port in the lid
Chamber overheating protection in the Rotanta 46R and Rotanta 46RS
SPEED
Max. Speed with angle rotor 7,500 RPM, 10,310 RCF
Max. Speed with swing-out rotor 4,500 RPM, 4,754 RCF
| Model
| Weight
(Kg)
| Dimensions W x H x D (mm)
| Available Voltage
| Part
Number
|
| ROTANTA 46
| 65
| 580 X 410 X 690
|
|
|
| ROTANTA 46S
| 65
| 580 X 410 X 690
|
|
|
| ROTANTA 46R
| 95
| 815 X 410 X 690
|
|
|
| ROTANTA 46RS
| 95
| 815 X 410 X 690
|
|
|
| ROTANTA 46RSC
| 110
| 580 X 635 X 690
|
|
|
| ROTANTA 46RC
| 110
| 580 X 635 X 690
|
|
|
| Rotor
Number
| Rotor
Type
| Places
| Tube
Size (mL)
|
| 4354
| SWING-OUT
| 4
| 1.1 - 100 ML
|
| 4444
| SWING-OUT
| 4
| 1.1 750 ML MICROTITRE
PLATES,
MICRONIC SYSTEMS,
CULTURE PLATES,
CYTO
|
| 4446
| SWING-OUT
| 6
| 1.1 - 250 ML AND
CYTO
|
| 4450
| ANGLE
| 12
| 1.5 - 85 ML
|
| 4445
| ANGLE
| 6
| 250 ML
|
| 4474
| SWING-OUT
| 4
| 50 - 100 ML
|
|
