| Rotina 46
Benchtop Centrifuge
Non-Refrigerated/Refrigerated
OPERATING AND FEATURES
Accommodates various tube systems from 0.4ml to 650ml as well as racks,
microtitre plates, micronic systems, culture plates and deep well plates
Microprocessor-controlled
“N” CONTROL PANEL
Clearly arranged, water-protected foil keypad for entering the parameters
3 complete running programs can be stored and recalled
Speed RPM: Input in increments of 10
Radius (r): Input in mm, max 99 min.
Running Time: Input in minutes
Impulse key
Relative centrifugal force (RCF): Input in increments of 10
Changer-over RPM/RCF: By entering the rotor radius r/mm the centrifuge will
calculate and indicate speed or RCF
Run up/run down time: Input of acceleration and braking ramps in levels of
1-9
Display of actual values of the parameters during centrifugation
Pre-cooling program is standard (CFC-free cooling) with Rotina 46R model
Temperature, T/C°: With Rotina 46R model, Controllable within a range of
-20°C to +40°C.
Input in increments of 1
“S” CONTROL PANEL
Clearly arranged, water protected foil keypad for entering the parameters
Ability to store 89 complete running programs
Speed RPM: Input in increments of 10
Radius (r): Needs to be entered when speed or RCF have to be determined
Running time (t): Input in minutes, max 999 min.
Relative centrifugal force (RCF): Input in increments of 1
Run up/Run down time: Input of acceleration and braking ramps in levels of
1-9
Deceleration with brake force cut-off: Input of the cut-off speed in RPM
Integral of the centrifugal acceleration: provides continuous information on
the
accumulated RCF the samples are exposed to during centrifugation
Pre-cooling program is standard (CFC-free cooling) with Rotina 46RS model
Temperature, T/C°: With Rotina 46RS model input of 1°C within a range
-20°C to +40°C
SAFETY
Metal housing and metal lid, paneling finished in scratch and impact resistant
coating
Stainless steel centrifuging chamber of stainless steel, easy to clean while
providing
additional safety
Convenient twist lock enables effortless opening and closing of the lid
Lid locking
Lid holding
Lid dropping protection
Imbalance switch-off
Emergency lid lock release
Viewing port in the lid
Chamber overheating protection in the Rotina 46R and Rotina 46RS
SPEED
Max. Speed with angle rotor 11,000 RPM, 13,800 RCF
Max. Speed with swing-out rotor 5,000 RPM, 4,528 RCF
| Model
| Weight
(Kg)
| Dimensions W x H x D (mm)
| Available Voltage
| Part
Number
|
| ROTINA 46
| 55
| 580 X 410 X 690
|
|
|
| ROTINA 46R
| 88
| 815 X 410 X 690
|
|
|
| Rotor
Number
| Rotor
Type
| Places
| Tube
Size (mL)
| Max RCF
|
| 4354
| SWING-OUT
| 4
| 1.1 - 100 ML
| 4,528
|
| 4624
| SWING-OUT
| 4
| 1.1 - 400 ML MICROTITRE
PLATES,
CULTURE PLATES,
DEEP WELL PLATES
| 3,578
|
| 4394
| SWING-OUT
| 4
| 1.1 - 250 ML
| 3,095
|
| 4296
| SWING-OUT
| 6
| 1.1 - 250 ML
| 3,631
|
| 4315
| ANGLE
| 6
| 1.5 - 85 ML
| 13,800
|
| 4622
| ANGLE
| 30
| 0.4 - 2.0 ML
| 12,715
|
| 4312
| DISC
| 12
| 15 - 50 ML
| 4,000
|
| 4316
| DISC
| 6
| 25 - 50 ML
| 805
|
| 4618
| SWING-OUT
| 8
| 1.1 - 50 ML
| 2,906
|
| 4322
| SWING-OUT
| 2
| 5 - 50 ML MICROTITRE
PLATES,
DEEP WELL PLATES,
RACKS
| 2.755
|
|
