| 
PRO
200
Hand-held or available with optional post/stand easy-lift
assembly
1/5 hp, high torque, variable speed motor
5,000 to 30,000 rpm
138 watt
Speed controlled via thumb slide switch
Maximum 72dB at full speed, super quiet
Able to homogenize samples with volumes as small as 0.03
ml to 2 L
Available in 115 or 220 volt
PRO 250
Hand-held or available with optional post/stand easy-lift
assembly
3/4 hp, high torque, variable speed motor
10,000 to 30,000 rpm
576 watt
Speed controlled via thumb dial switch (on standard models)
Able to homogenize samples with volumes as small as 0.03
ml to 20 L
Available in 115 or 220 volt
Optional Speed Control Box available for variable speed, 0 to
30,000 rpm (Analog Speed Control Box with dial knob to
control speed)
PRO 260
Hand-held or available with optional post/stand easy-lift
assembly
3/4 hp, high torque, variable speed motor
1,000 to 30,000 rpm
576 watt
Standard Speed Control Box displays speed on LED
display, speed controlled via dial knob
Able to homogenize samples with volumes as small as 0.03
ml or as large as 20 L
Available in 115 or 220 volt
PRO 300A & 300D
PRO TRAC stand whose linear ball screw and linear ball
bushings provide smooth, accurate motor positioning
3/4 hp, high torque, variable speed motor
0 to 28,000, with a speed variation of 1% over the entire
range
700 watt
Speed Controlled via dial knob
Most advanced closed-loop speed control available
Able to homogenize samples with volumes as small as 0.03
ml to over 20 L
Available in 115 or 220 volt
Available in analog, (speed control via dial knob) or digital
control, (speed control via dial knob and displayed on a LED
display)
PRO 350
PRO TRAC stand whose linear ball screw and linear ball
bushings provide smooth, accurate motor positioning
1 hp, high torque, variable speed motor
0 to 22,000, with a speed variation of just 1% over the entire
range
816 watt
Speed Controlled via dial knob
Able to homogenize samples with volumes as small as
0.03 ml to over 20 L
Available in 115 or 220 volt
Digital LED display shows generator speed throughout
homogenizing
PRO 400
PRO TRAC stand whose linear ball screw and linear ball
bushings provide smooth, accurate motor positioning
1 1/2 hp, high torque, variable speed motor
0 to 23,000, with a speed variation of just 1% over the entire
range
1200 watt
Speed Controlled via dial knob
Able to homogenize samples with volumes as small as 0.03 ml
to over 40 L
Available in 115 or 220 volt
Digital LED display shows generator speed throughout
homogenizing
PRO "P" Programmable
Available for 300, 350 and 400 models
Front-mounted digital LCD display shows data
and prompts
Capable of manual or programmable control
Control and programming is done right on the
homogenizer's front-mounted touch pad
Ability to set up and store four different programs
for different homogenizing tasks
Each program created can have as many as 23
different cycles with each cycle defining speed,
run time and pause before the next cycle
Data and prompts appear on a front-mounted
LCD
PRO "PC" Programmable
Front-mounted digital LCD display shows data
and prompts
Capable of manual or programmable control
Control and programming is done right on the
homogenizer's front-mounted pad or from
computer
When programming from homogenizer face, user
has ability to set up and store four different
programs for different homogenizing tasks
Computer interfaced (RS232 and RS485/RS422
serial communication modes), allowing user to
store infinite number of programs
Each program created can have as many as 23
different cycles with each cycle defining speed,
run time and pause before the next cycle
Data and prompts appear on a front-mounted
LCD
Data can be graphed on the computer screen as
homogenization process
Both the programs and data collected (set time
and set speed versus actual time and actual
speed) can be stored and recalled for screen
displays or printout
Accessories
PRO Quick Connect Generators
PRO Safety Seal Chamber Assemblies
PRO Multi-Gen 7
|
